Product Range
Builders Metalwork
Product Sub-range
Joist Hangers
Product Type
Masonry (built-in) Single Piece Hanger
European Standard/ETA
BS EN845-1:2013+A1:2016
Test Standard
BS EN 846-8:2000
Notified Body
Lucideon Ltd (NB 1289)
Material
Galvanized Mild Steel DX51D+Z600 to EN10346:2015
Coating/Finish/Colour
600g/m² Zinc Coating
Length 1/Projection
75mm Shoe, 75mm Flange
Plaster/Render/Joist depth
63mm Joist Width
Individual Weight (kg)
0.433
Declared Loadbearing Capacity
5kN SWL (SLS)
Fixing Type
Built in to masonry - No mechanical fixings required to wall. 3.75x30 square twisted nails to connect joist.
Installation requirement 1
Back of hanger must be tight against wall.
Installation requirement 2
Joists are to be cut square with a gap not exceeding 6mm from the rear of the hanger.
Installation requirement 3
A minimum 675mm of set masonry must be in place over support flange before loads are applied.
Installation requirement 4
Joist to be nailled through side gusset using 3.75x30mm square twisted nails.
Installation requirement 5
The underside of joists should be notched to provide a level surface for plasterboarding.
Unit of Sale EAN
5014316000741
Packaging material
Cardboard
Carton/Size
508 x 340 x 204
Packaged transit weight
18.02
Features/Benefits 1
Single piece, non welded construction
Features/Benefits 2
Non coaxial fixing holes
Features/Benefits 3
600g/m2 galvanized coating
Features/Benefits 4
Manufactured 10mm less to allow for notching/joist regularisation
